Specifications

Electrical Specifications

Power Requirements                                            120 VAC  50/60

Power requirement varies according to load.  Main input power to console is limited by a 10 amp circuit breaker.

Three Way Room Light Circuit

Optically isolated relay controlled.

120 VAC to 277 volts
50/60 hertz 500 watts maximum.

Fluorescent

120 VAC  500 watts maximum.

Incandescent

External Loads

This circuit should be limited to 500 watts total.

Examination Light

100 watts maximum.

P.O.C. Outlet

Auxiliary Outlets

These should be limited to 250 watts each.

Low Voltage Loads

Protected by circuit breakers.

Screentest 1, 3, & 4

12 VAC - 1 amp

Screentest 2

7.5 VAC - 2 amps

Control Circuits

15 VAC - 1 amp

Charging Wells
Output

2.0 volts @ 50 Ma. nominal
(100 Ma. short circuit)

6.0, 7.5, or 12.6 VAC Jumper selected
6.0, 7.5 volt use 3 Amp fuse
12.6 volt use 1 amp fuse

Indirect Control
Center

Construction Specifications

    The COW Industries Refraction Desk II utilizes the highest quality materials and workmanship.  The desk section is constructed from 5/8" luan, pine cross member tie-ins, and floors of 5/8" luan.  Cabinets are glued, nailed, and screwed together.  The console section is constructed from 5-ply 1/2" luan, glued and stapled.  All desk tops are 1-3/8" thick.  Drawer faces are 5/8"and sides are 1/2" thick and use European bottom mount drawer guides.  All laminate surfaces are high pressure laminate, 3/64" thick.

Products / Tech. Info / About The Company / E-Mail

COW Industries, Inc.
925 26th Avenue East
Bradenton,  FL  34208

Ph. 1-800-741-4616

Fax (941)746-4820